Currency

$
$9,000.00

Well Stimulation.

Meet SME-120 Bull Head application

Per Metric Ton
275 Gallon Tote
Shipping Worldwide

EOR - Enhanced Oil Production based on surfactant microemulsion

VME-120 is a microemulsion product with nano particles with 10 – 15 nano meters. This is a Bull Head application for stimulation. Best for Chalk formations and limestone. Temperature limits at 250F or 121C.  This works best in conventional formations in normal stimulations and in water floods.  This product is available in a high temperature formula VME-120H.

Image
Packaging 275 gallons tote
Weight 238 gallons (1 Metric Ton) per tote
Order Minimum 1x 275 gallons tote (1 Metric Ton)
Transport Not Regulated
1

Product Dilution

Mix VME-120 at 3 to 4 GPT directly into 2% to 3% True KCL (No Substitute KCL should ever be used).
2

How to use it

VME-120 is to be pumped directly into the formation using the normal pumping methods used for Well Stimulation. Soak times range between 7 to 14 plus days at a minimum. Once the optimum Soaking Period has been met the well flow should only be opened to a maximum of Flow Rate of a 30% capacity for the next 2 months. The Flow Rate should gradually be opened to full flow over the next 2 months. This process will help insure, that the VME-120 stays working in the formation and is not passed out immediately during of the oil recovery process.
3

Important notes

Note: In reviewing well stimulating programs always consider the review of the well’s core analysis data to understand each well’s Clay content within the formation. If Clay is found in the Formation, then a 2 to 3% KCL (Potassium Chloride) should be used as a dilution with the water volume to prevent most Clays from swelling and inhabiting the oil flows. In cases where high levels of Smectite are found in the well’s formation (Volumes Greater than 8%), then use our products are best used in conjunction with PHPA, or displaced with Nitrogen or CO2, during the stimulation process. Note: Each product above will change the formation’s rock from Oil Wet to Water Wet or are offered in specific products that will change the rock from Oil Wet to Water Wet.

SME-120 Documentation

Download Brochures and SDS.
Delivery options

When you order from our Store, you'll choose a shipping method at checkout. Your choice affects how long it takes for your order to be delivered. Note: Shipping is unavailable to PO boxes and shipping options vary by region.

Track your shipment

After check-out, depending by quantity of products ordered, a detailed delivery schedule will be sent to your email. After loading, also BOL and tracking code will be sent to your email.

Split shipments

Your order might be sent in more than one shipment so you get your items as they become available.

AlphaZyme D-300 and FI1741 - Lab Test

AlphaZyme D300 Lab Test performed at room temperature.
Well Stimulation. Meet SME-120 Bull Head application Per Metric Ton275 Gallon ToteShipping Worldwide Overview Tech Specs How it works Download Privacy EOR - Enhanced Oil Production based on surfactant microemulsion VME-120 is a microemulsion product with nano particles with 10 – 15 nano meters. This is a Bull Head application for stimulation. Best for Chalk formations and limestone. Temperature limits at 250F or 121C.  This works best in conventional formations in normal stimulations and in water floods.  This product is available in a high temperature formula VME-120H. Packaging 275 gallons tote Weight 238 gallons (1 Metric Ton) per tote Order Minimum 1x 275 gallons tote (1 Metric Ton) Transport Not Regulated 1 Product Dilution Mix VME-120 at 3 to 4 GPT directly into 2% to 3% True KCL (No Substitute KCL should ever be used). 2 How to use it VME-120 is to be pumped directly into the formation using the normal pumping methods used for Well Stimulation. Soak times range between 7 to 14 plus days at a minimum. Once the optimum Soaking Period has been met the well flow should only be opened to a maximum of Flow Rate of a 30% capacity for the next 2 months. The Flow Rate should gradually be opened to full flow over the next 2 months. This process will help insure, that the VME-120 stays working in the formation and is not passed out immediately during of the oil recovery process. 3 Important notes Note: In reviewing well stimulating programs always consider the review of the well’s core analysis data to understand each well’s Clay content within the formation. If Clay is found in the Formation, then a 2 to 3% KCL (Potassium Chloride) should be used as a dilution with the water volume to prevent most Clays from swelling and inhabiting the oil flows. In cases where high levels of Smectite are found in the well’s formation (Volumes Greater than 8%), then use our products are best used in conjunction with PHPA, or displaced with Nitrogen or CO2, during the stimulation process. Note: Each product above will change the formation’s rock from Oil Wet to Water Wet or are offered in specific products that will change the rock from Oil Wet to Water Wet. SME-120 Documentation Download Brochures and SDS. SME-120 Brochure Delivery options When you order from our Store, you'll choose a shipping method at checkout. Your choice affects how long it takes for your order to be delivered. Note: Shipping is unavailable to PO boxes and shipping options vary by region. Track your shipment After check-out, depending by quantity of products ordered, a detailed delivery schedule will be sent to your email. After loading, also BOL and tracking code will be sent to your email. Split shipments Your order might be sent in more than one shipment so you get your items as they become available. AlphaZyme D-300 and FI1741 - Lab Test AlphaZyme D300 Lab Test performed at room temperature.
Dimension (L x W x H) 45 x 40 x 46 Inch
Weight 2205 Pound

Large Purchase Orders ?

For orders bigger than 250 MT, please do not hesitate in contacting us directly.
Image
Image
The best oilfield chemicals to increase production and maintain a green environment.

Subscribe